Enerji Tasarruflu Üç Fazlı Yağlı Dağıtım Transformatörü ne tür kayıpları en aza indirmeyi hedefliyor ve tasarımında bu nasıl başarılıyor?- Jiangsu Dingxin Electric Co., Ltd.

Enerji Tasarruflu Üç Fazlı Yağlı Dağıtım Transformatörü ne tür kayıpları en aza indirmeyi hedefliyor ve tasarımında bu nasıl başarılıyor?

Energy-Saving Three-Phase Oil-Immersed Distribution Transformers goal to reduce several styles of losses, that can occur throughout the conversion and transmission of electrical energy.

Bakır Kayıpları (I²R Kayıpları):

Copper losses arise due to the resistance of the transformer windings. When electric powered cutting-edge flows through the conductors, it encounters resistance, leading to the time of heat.

Energy-saving transformers often use excessive-conductivity materials for their windings, which includes copper or aluminum, and might hire large conductors to decrease resistance and reduce copper losses.

Iron or Core Losses (Hysteresis and Eddy Current Losses):

Hysteresis losses end result from the repeated magnetization and demagnetization of the transformer core in the course of every AC cycle.

Eddy modern-day losses occur whilst circulating currents are prompted within the core, main to resistive heating.

Energy-saving transformers use superior core substances with low hysteresis and eddy current losses. The core is frequently constructed from laminated metallic sheets to reduce eddy currents.

Başıboş Kayıplar:

Stray losses encompass losses that occur in numerous elements of the transformer, such as the tank, clamps, and different structural components.

Careful design and construction strategies, such as using properly-insulated substances and optimizing the transformer's shape, help reduce stray losses in power-saving transformers.

Dielektrik Kayıplar:

Dielectric losses end result from the interplay of the electrical area with the insulating materials inside the transformer, main to the generation of warmth.

Energy-saving transformers may additionally use high-quality insulation materials with low dielectric losses to enhance common performance.

Load-Dependent and No-Load Losses:

Load-dependent losses arise while the transformer is supplying strength to a load, and they include copper losses and load-structured middle losses.

No-load losses, additionally referred to as idle losses, occur while the transformer is energized however not providing electricity to a load. These losses include center losses and losses associated with the energization of the windings.

Energy-saving transformers may additionally include functions which include on-load tap changers (OLTC) to optimize the turns ratio and decrease no-load losses beneath varying load situations.